FST800-3051HP Preferate Final Hersteller kostengünstige Differenzdruckmessumformer
FST800-3051HP Preferate Final Hersteller kostengünstige Differenzdruckmessumformer
Produktbeschreibung
FST800-3051HP Firstrate Final Hersteller niedrigen Kosten Differenzdruck-Transmitter \ n Unsere Vorteile Mhy Wählen Sie unsere Firrate? \ N \ n ♦ Focus auf sensor produktion für mehr als 50 jahre; \ n ♦ Fabrik direkt preis; \ n ♦ 12 monate kostenlose reparatur garantie; \ n ♦ Firstrate produkte haben vergangene CE, ROHS, ISO9001 etc. \ n Produktbeschreibung
Abmessungen \ n Verkabelung Verbindung \ n Unternehmensinformationen \ n Über Hunan FIRSTRATE Sensor Co., Ltd. Hunan FIRSTRATE Sensor Co., Ltd. ist ein High-Tech-Joint-Venture, das auf die Erforschung, Herstellung und den Vertrieb von Sensoren und Sendern spezialisiert ist. Unsere Produkte umfassen Drucksensoren und -transmitter, Temperatursensoren und -transmitter, Füllstandssensoren und -transmitter, Windgeschwindigkeits- und -richtungssensor und intelligente Kontrollinstrumente. Sie sind weit verbreitet im Bereich der Luftfahrt und Raumfahrt, nationale Verteidigung und militärisches Projekt, Maschinenbau, Eisenbahn-und Stadtbahn-System, Automobil-Elektronik-System, HVAC, Luftkompressor, Textil-, Petrochemie-, Kohle-Minen und andere industrielle Automatisierungssteuerung. \ n \ n Mehr über firtrate Firma \ n firtrate ist verpflichtet, die Forschung & Entwicklung der internationalen führenden Microfused-Technologie, übernimmt die Microfused Silicon Dehnungsmessstreifen Produktionstechnik, CAN (Controller Area Network) -Technologie und breite Temperatur digitale Kompensation Datensystem. MEMS-Sensoren wurden von Wissenschaftlern und Ingenieuren aus der Industrieautomation anerkannt und hoch gelobt. Gegenwärtig hat unser Unternehmen 12 nationale Erfindungspatente, 30 plus Gebrauchsmusterpatente erklärt. Und haben Sie die Zertifikate von CMC, CE, Sicherheit und flammsichere Zertifizierung und ROHS. \ n Weitere heiße Produkte
FAQ \ n F: Sind Sie Hersteller oder Handelsunternehmen? \ n A: Wir sind Hersteller mit mehr als 50 Jahren Erfahrung. Unsere Anlage hinzufügen ist Nr. 18 # von Electrolux Avenue, Muyun Industriepark, Changsha, Hunan, China. Willkommen bei unserem Unternehmen zu besuchen. \ n \ n F: Können wir unser Logo auf den Produkten verwenden? \ n A: Ja. Wir können Soem-Service zur Verfügung stellen. \ n \ n F: Was ist die Garantie Ihrer Produkte? \ nA: Unser Service ist kostenloser Austausch innerhalb von drei Monaten und ein Jahr Garantie für nicht von Menschen verursachte Schäden. \ n \ n F: Was ist Ihr MOQ? \ n A: Wir haben keine MOQ-Grenzen, ein Stück zu Testzwecken ist zunächst akzeptabel. \ n \ n F: Was ist das Transportmittel? A: Express wie TNT, Fedex, DHL, UPS für Fracht vorausbezahlt, kann auch Ihre eigenen Couier-Konto, um die Fracht sammeln, nur für Ihre Bequemlichkeit. \ n Kontaktieren Sie uns \ n
Product Description | ||||
FST800-3051HP Firstrate Final Manufacturer low cost differential pressure transmitter is used the Monocrystalline silicon sensor chip which imported from Germany , floating structure design, with super Overvoltage performance and excellent stability. The product can measure differential pressure accurately and converts it into a 4-20mA signal output. The product can be operated by a three-button local operation or a universal terminal and configuration software remotely. Products are widely used in petroleum, chemical, Electricity, pulp, paper, city gas, steel, machinery, shipbuilding and other industrial fields. | ||||
Product Features | ||||
♦ High accuracy: Differential pressure (flow) Transmitter's measurement range is within 0.5 ~ 500kPa , can be carried out with high accuracy measurement. Standard calibration range accuracy: ± 0.075%, plus or minus zero migration, No need for linear adjustment. ♦ Excellent environmental adaptability: Intelligent static pressure compensation and temperature compensation to protect the transmitter from temperature, static pressure and over-pressure effects, and control the field measurement error to be minimum value. ♦ Operability and convenience, 5 digit LCD display with backlight, Various units available (Pa, Kpa, Mpa, bar, mbar,%, psi, mmH2O), Field button function operation, with a variety of anti-corrosion materials, a comprehensive self-diagnostic function ♦ Smart HART fieldbus protocol | ||||
Product Specifications | ||||
Measured fluid | liquid, gas, steam | |||
Measuring range | kpa | mbar | mmH2O | |
HP1 | 0.5~10 -10~10 | 5~100 -100~100 | 50~1000 -1000~1000 | |
HP2 | 1~20 -20~20 | 10~200 -200~200 | 100~2000 -2000~2000 | |
HP3 | 1~40 -40~40 | 10~400 -400~400 | 100~4000 -4000~4000 | |
HP4 | 1~100 -100~100 | 10~1000 -1000~1000 | 100~10000 -10000~10000 | |
HP5 | 2~200 -200~200 | 20~2000 -2000~2000 | 200~20000 -20000~20000 | |
HP6 | 5~500 -500~500 | 50~5000 -5000~5000 | 500~50000 -50000~50000 | |
Note: | Work pressure (Membrane box code and wetted material code,please see the selection table) | |||
Membrane box | wetted parts materials | Work pressure (unilateral + bilateral) | ||
HP1,HP2,HP3,HP4,HP5,HP6 | 01,02,03,04,05,06 | 25MPa | ||
Allowable load resistance 0~600Ω | 0 ~ 600Ω (at DC 24V) Note: | |||
Noted | At least 250Ω load resistance is required to communicate with the handheld communicator | |||
Power supply | 24VDC(10.5VDC~45VDC), Intrinsically safe:10.5~26VDC | |||
Signal Output | 4~20mA DC+HART protocol | |||
Communication line condition | ||||
Line length | 2Km(0.75~1.25mm2) Controller cable, if more than 1km ,use twisted pair cable | |||
Load Resistance | 250 ~ 600Ω (DC 24V, including cable resistance) | |||
Load capacitance | below 0.55mF | |||
Load inductance | below 3.3mHmF | |||
Power line interval | above 15cm (to avoid parallel wiring) | |||
Saturation current limit | maximum: 20.8mA, minimum: 3.8mA | |||
Alarm current limit | maximum: 22.8mA, minimum: 3.6mA (mode can be set) | |||
adjustment function | Zero, full-scale point can be adjusted by the first three keys in the display. It can be also adjusted in the live site or be adjusted remotely by the configuration software. | |||
zero shift | Shift from a maximum range of -20% to + 20% | |||
Output | Iinear output Square root output (can be remotely adjusted by configuration software) | |||
Ambient temperature | -40~+85°C(when fully fill in Fluorine oil -10~+60°C) | |||
storage temperature | -40~+90°C (When filling fluorine oil,-10~+60°C) | |||
weatherability | DIN40040GPC | |||
EMC Applicable standards | EN1326-1:2006 | |||
Performance Specifications | ||||
Specifications of voltage excitation(10VDC 25°C) | ||||
Accuracy | range | reference accuracy | ||
HP1,HP2,HP3,HP4,HP5,HP6 | TD 1:1 | =±0.075% | ||
TD-range ratio | Td > 1:1 | =±(0.008×TD+0.075)% | ||
Square-root output accuracy | Output | Accuracy | ||
≥50% | the same as references accuracy | |||
50 -Drop points |
Reference accuracy*50 Square root ouput |
|||
Ambient temperature effects | Total amount of effect/28°C(50º F) | effect | ||
HP1,HP2,HP3 | ±[0.07% range +0.015%maximum range ] | |||
HP4,HP5,HP6 | ±[0.07% range+0.03% maximum range] | |||
Static pressure effect | HP1,HP2,HP3,HP4,HP5,HP6 | ±[0.1% range +0.028% maximum range ]/6.9MPa | ||
over pressure effect | ±0.05% maximum range /16MPa | |||
stability | maximum range/year | |||
power supply effect | ±0.005% /1V | |||
Impact of installation location | the diaphragm surface which is parallel to the mounting position changes will not cause zero drift, if the mounting position and diaphragm surface changes over 90 °C | |||
response time | 90ms | |||
Damping | The time constant can be adjusted within 0 ~ 99.9 seconds | |||
Filter constant | Can be adjusted within 0 ~ 160uA | |||
Self-stabilizing coefficient | Can be adjusted within 0 ~ 2% | |||
Structure Material | ||||
Wetted part material | showed in selection model table | |||
Detection parts | ||||
Material code | Isolation diaphragm | Install the splint | ||
01 | SUS316L | SUS316 | ||
02 | Hastelloy C-276 | SUS316 | ||
03 | Tantalum | SUS316 | ||
04 | SUS316L gold-plating | SUS316 | ||
05 | Hastelloy C-276 | Hastelloy C | ||
Contact liquid seal ring | Fluorine rubber, NBR (optional) | |||
transmitter housing | Low copper aluminum die casting + polyurethane coating | |||
transmitter housing cover | Low copper aluminum die casting + polyurethane coating | |||
IP grade | IP67 | |||
Inscription card | SUS304 | |||
Filling oil | Silicone oil, fluorine oil (optional) | |||
Dimension | according to the diagram | |||
Gross weight | About 2.2 ~ 2.7 kg (body) | |||
Cable entry | G1/2,1/2-14NPT,M20*1.5 | |||
Outer end | M3 Screw | |||
Process connection | 1/4-18NPT or Rc1/4 | |||
installation method | Use a U-bolt on a 50mm (2-inch) pipe or install on a wall (based on model specifications) |
Produktgruppe : Temperatur-Transmitter
Premium Related Products
andere Produkte
heiße Produkte
Adblue Füllstandssensor für SCR-SystemFST800-211A OEM-Service angeboten 4-20mA Druckmessumformer für General IndustrialFST800-901 China Herstellung von Differenzdrucktransmitter 4-20mAFST800-902 Mikro-Differenzdruck-Messumformer für FlüssigkeitenFST800-211A Generator Öldruck Transmitter Sensor Druckmessumformer für AutomobilFST700-201 Capacity Capacitive Ölstandstransmitter HerstellerFST200-201 Mechanischer Anemometer Sensor des abschließenden Lieferanten mit CERFST-RP Aluminiumgehäuse Magnetostriktiver Wegsensor, magnetostriktiver PositionssensorFST700-101 Eingang Füllstandstransmitter, Eingangstyp FüllstandmessumformerFST600-202 Integrierter Temperatursensor, Smart Integrierter TemperatursensorUniversal-Druckmessumformer FST800-211 4-20mAFST800-202 Universeller industrieller HP-DrucksensorFST600-205 Explosionsgeschützter TemperaturmessumformerFST600-101 Temperatursensor Pt100 Pt1000FST200-201 Mit CE Windgeschwindigkeitssensor tragbaren Anemometer für WindkraftanlageFST800-211 CE und RoHS zugelassener universeller 4-20mA Drucktransmitter